Din Mounted Change Over Switch

Din Mounted Change Over Switch

Din Mounted Change Over Switch

CO-MOD


Application & Specification

The product is of four functions as switch on and off, conversion and isolation, can be used in a group of line with two loads, as well as two power supplies.

 

The 3P can also be used to control the positive and negative rotation of the motor, with standard DIN rail (35x7.5mm) mounted, the housing is molded by PA66 material, with high flame retardant performance.  



Technical Data

Rated Current

40A, 63A, 100A, 125A

Voltage

415V AC 50/60Hz

Standard

IEC60947-3

Poles

1P, 2P, 3P, 4P

Installation location

Mount on the place where has no obvious vibration or impact

Connection terminal

Screw terminal

Installation

Installed on 35mm DIN rail

Ambient temperature

-5~+40℃

the average value cannot exceed to +35℃ within 24h



Instruction for Use

2P:

When the handle is in the M position: 1,2 and 5,6 are connected

When the handle is in the S position: 1,4 and 5,8 are connected

 

4P:

When the handle is in the M position: 1,2 / 5,6 / 9,10 and 13,14 are connected

When the handle is in the S position: 1,4 / 5,8 / 9,12 and 13,16 are connected

 


Dimension(mm)